Qti-T/E 1X18-57/230-240 Dim - Osram

£26.67

Description

Product family features
– Corridor function for direct connection of ECG to common motion sensor
– Corridor function with pre-programmed light program
– Touch DIM function for free parameterization of light value and turn on time
– Fit for SMART GRID for feedback of consumed mains power and lamp operating hours
– Fit for emergency function for automatic detection of emergency lighting by ECG
– Very low standby power consumption: < 0.5 W - Lifetime: > 100,000 h (for T = 65 °C at Tc)
– Very high number of switching cycles: up to 300,000
– Dimming range: 1…100 % (3…100 % with compact fluorescent lamp)
– POWER2LAMP function for optimal matching of ECG power
to lamp during lamp lifetime
– Line frequency: 0 Hz, 50…60 Hz, rectified AC

Product family benefits
-System+ Guarantee available
– Easy integration in luminaire thanks to same dimensions like DALI GI ECG

DALI product features
– Control via the DALI interface
– Compliance with the DALI Version-1 and IEC 60929
-Control input protected against overvoltage and polarity reversal (OSRAM ECG)

Touch DIM and Touch DIM Sensor function
– Manual dimming without a controller and with standard switches
– Including memory function (double click) and soft start

Areas of application
– Suitable for use in emergency lighting systems as per EN 50172/DIN VDE 0108-100
– Installation in emergency lighting systems according to IEC 61347-2-3, appendix J
– Open-plan offices, corridors and storage rooms
– Public buildings
– Suitable for luminaires of protection class I

Additional information

Dimensions 12.30 × 7.90 × 3.30 cm
Nominal Voltage

220…240 V

Mains frequency

50/60 Hz

Input voltage DC

154…276 V

Maximum output power

57 W

Efficiency in full-load

90 %

Networked standby power [GMS]

<0.50 W

Operating frequency

42/130 kHz

Max. ECG no. on circuit breaker 10 A (B)

12

Max. ECG no. on circuit breaker 16 A (B)

19

Inrush current

30

Starting time

0.6 s

Mounting Hole Space Length

129.5 mm

Mounting hole spacing, width

67.0 mm

Product weight

227.00 g

Cable cross-section, input side

0.5-1.5 mm

Ambient temperature range

+10-+50 °C

Permitted rel. humidity during operation

5-85%

ECG lifetime

100000 h

Product remark

Optional cable clamp, see chapter ECG mountings –
cable clamp

Suitable for lamp power (1 lamp)

18/57 W

Dimming interface

DALI / Touch DIM / Touch DIM Sensor

Dimming range

3/100 %

Dimmable

Yes

Overheating protection

Yes

Suitable for fixtures with prot. class

I

End of lamp life safety shutdown

EOL T.2

Max. cable length to lamp/LED module

0.5 m

Intended for no-load operation

No

Approval marks – approval

VDE / VDE-EMC / EL / EAC / RCM / CCC

Standards

Acc. to EN 55015/Acc. to EN 61000-3-2/Acc. to EN
61547/Acc. to EN 61347-2-3/Acc. to EN 60929/Acc. to
EN 55015:2006 + A1:2007/Acc. to EN 61000-3-2/Acc. to EN 61547/Acc. to IEC 62386-101:Ed1/Acc. to IEC 62386-102:Ed1

EEI – Energy Label

A1 BAT

Protection class

I

Type of protection

IP20

Commodity code

850410809000

Reviews

There are no reviews yet.

Be the first to review “Qti-T/E 1X18-57/230-240 Dim – Osram”

Your email address will not be published.